Request now

Fuel control

Enjoy the 30-day test phase now and see the quality of our system. It's good to trust..
Save up to 50% on your monthly fuel expenses not only by monitoring driver behavior but also by minimizing fuel theft. Our fuel sensor measures fuel quantity with 99% accuracy! No blind spots!

Every truck comes with a factory-installed fuel level sensor. However, the drawback of this factory float sensor is that it does not register dead zones, which are structurally determined. As a result, the readings from the standard sensor are approximate and inaccurate. Depending on the tank volumes, the dead volumes not recorded by the factory sensor can reach up to 100 liters. We detect this when observing data from the truck's computer. The sensor measures the fuel up to a certain position, but when the tank is full, the so-called dead zone is not registered. This often leads to assumptions of fuel shortage.

How does CAST Engineering's solution help you?

Our fuel monitoring sensor measures the total amount of fuel with 99% accuracy. Once the tank is full, you get a complete and accurate picture of how much fuel is actually available. The fuel monitoring sensor also has a built-in thermometer to measure the temperature of the fuel in the tank. Depending on the fuel temperature, the sensor makes a level correction and thus compensates for temperature expansions. In the event of atypical shortages in the fuel, you will immediately receive a warning of abnormally high consumption of the truck. The system also lets you know if the truck's engine is running during the break. This feature reveals great fuel-saving potential.

Integration of fuel monitoring sensor

You don't need to worry about anything. The integration of the sensor is carried out by our highly qualified engineers. Your company will not incur any additional costs for integration. We offer our customers a comprehensive service solution, which includes all integration and adaptation costs. The integration time is approximately 45 minutes per truck.

CAST fuel monitoring solution for construction machinery

Fuel monitoring for construction machinery is very utopian as consumption information is often missing or very difficult to decipher.
Fuel consumption of large construction machines is very high and can be measured per hour.

Our system will assist you with:

Accurate tracking of fuel level data with up to 99% precision
Precise indication of fuel levels in each of the tanks
Accurate recording of fuel refills
Precise fuel gauge
Accurate detection of fuel thefts
Intelligent signal filtering algorithm
Flexible analysis of driving behavior leading to higher fuel consumption.

Fuel monitoring for construction machinery is very utopian as consumption information is often missing or very difficult to decipher.
Fuel consumption of large construction machines is very high and can be measured per hour.

With our fuel monitoring system we have made it easy to measure the exact consumption of the machine. In addition, our system calculates how long the construction machine can be used before it needs to be refueled.

In most cases large construction machines are rented by construction companies.

The hourly engine consumption data, which can be read from our fuel monitoring system, allows the company to accurately calculate the cost when hiring the construction machine.

Contact us! CAST Engineering!

Need more information about our products and solutions?

We at CAST Engineering Ltd. are always available to answer your questions.

Let our specialists advise you. Take advantage and test our products for 30 days absolutely free.